I just wanted to take the time to the Chad for the awesome work he did on my AFR 210. So far I have already picked up 2 tenths gain with nothing but the head work. He also found an issue with the way the exhaust valves were cut which significantly reduced flow. This caused reversion in my engine to the point that the underside of my carb was black. Chad picked up the flow of my 18 CFM across the range of the head. Head were backing up at 600 lift and now they flow all the way to 900 lift. Chad is very knowledgeable and took the time to answer all my questions.  With the gains I have realized thus far, I can't wait to build a motor that will fully utilize the capability of the heads.
 
Thanks for awesome work
 

Bill Simpkins

 

 

I just want to thank Chad for a well done job on my Brodix Track1 Heads. When he got them they were starting to back up at 600 lift now they flow all the way to 900 with on problem. My car would slow down when it got hot and the humidly would be high but not anymore.. Chad is a real stand up guy that knows his trade and I would not have any problem recommending him to other racers..
 
                            Thanks again for a good job and service.....
                             Jim Duke ( Jones Brothers Motorsports )

 

 

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hit Counter